O&M CLEAN.tone Red Colour Treatment 200ml

Red is a signature colour: rich, magnetic, assertive. It enhances the complexion, gives dimension and instant presence. But it is also one of the tone families that fades the fastest: under the influence of washing, UV, brushing and oxidation, the lengths lose density, slip into fade, or drift towards incoherent warm undertones (too orange, too brown, not red enough). O&M CLEAN.tone Red Colour Treatment responds precisely to this reality: a Red Colour Treatment with a deposit-only logic (no lightening) that re-enriches the fibre with directional red pigments, re-harmonises the shade and reawakens the radiance, all in one express step at home.

Who is O&M CLEAN.tone Red Colour Treatment for?

• Reds, auburns, mahoganies, natural or coloured: to reinforce the signature and extend intensity between services.
• Dark blondes to light browns (≈ levels 5 to 7): to warm the base and steer the colour towards a true red or a deep auburn.
• Warm highlights/balayage: to blend transitions, re-pigment lighter areas and even out the overall read.
• Red colourings that wash out quickly: the red repigmenting treatment re-anchors the tone between shampoos.

How does a Red Colour Treatment work?

The principle is simple: O&M CLEAN.tone Red Colour Treatment does not lift the base and does not oxidise; it deposits red pigments on the surface of the fibre. You dose intensity through processing time:

• 3 minutes: subtle red veil, “radiance boost” effect;
• 5 to 7 minutes: supported red, harmonised, more present;
• up to 10 minutes: intense and luminous red, for a strong visual impact.

This deposit-only logic avoids a root effect, preserves the existing base and allows a homogeneous read across the entire head of hair. The Red Colour Treatment behaves like a pigment gloss: fast, precise and controllable.

Expected results

• Shade: deep, clean and even red.
• Radiance: amplified shine, controlled red glow.
• Texture: supple, disciplined, pleasant hair.
• Longevity: depending on porosity and washing habits 1 to 3 shampoos; the regularity of use creates the constancy of the result.

Why use O&M CLEAN.tone Red Colour Treatment 200ml?

Because red evolves quickly and requires precise pigment maintenance. O&M CLEAN.tone Red Colour Treatment is a Red Colour Treatment that is buildable, fast and fibre-respectful, which recharges the hair with red pigments for a dense, luminous and modern finish. You control intensity, you extend the salon effect, you harmonise your lengths — all with a red repigmenting treatment that is safe, simple and effective.

See all O&M products

• Directional red pigments: a Red Colour Treatment that re-enriches the shade and manages warmth.
• Buildable (3–10 mins): made-to-measure intensity according to porosity and objective.
• Care + colour: conditioning base for suppleness, slip and shine.
• Visual harmonisation: blends highlights/balayage, softens demarcations.
• Express ritual: a red repigmenting treatment that easily integrates into the routine.

Modern result: red that is chic, clean and photogenic.

1. Shampoo your hair and then towel-dry thoroughly.
2. Put on gloves and protect fabrics (red pigments).
3. Apply O&M CLEAN.tone Red Colour Treatment section by section to damp hair: start with the mid-lengths and ends, then, if needed, work towards the roots (always leave less time at the roots if they are darker).
4. Comb through for even distribution.
5. Processing time: start at 3 minutes, observe the result, then increase up to 10 minutes to intensify the red.
6. Rinse thoroughly until water runs clear; style as usual.
7. Frequency: repeat as soon as intensity and shine fade (often after 1 to 3 washes).

Pro tips

• On lighter zones (lightened ends), leave 1 to 2 minutes longer for a blended result.
• For a luminous red without excess, favour fine sections and meticulous comb-through.

If your scalp is sensitive, avoid prolonged contact and patch-test in the elbow crease 24 hours before use.

Aqua (Water), Propanediol, Cetearyl Alcohol, Caprylic/Capric Triglyceride, Distearoylethyl Hydroxyethylmonium Methosulfate, Stearamidopropyl Dimethylamine, Phenoxyethanol, Lactic Acid, Geraniol, Ethylhexylglycerin, Citronellol, Limonene, Parfum (Fragrance)*, Linalool, Glycerin, Quaternium-91, Basic Red 51, Cetrimonium Methosulfate, Basic Blue 124, Basic Yellow 87, Syzygium Leuhmanii Fruit Extract (Lilly Pilly), Acronychia Acidula Fruit Extract (Lemon Aspen), Davidsonia Pruriens Fruit Extract (Davidson Plum) *Naturally derived

Note: The listed ingredients correspond to the current state of production. New scientific findings are regularly incorporated into the formulations, which means that formulations may change accordingly. That is why the ingredients appearing on the product or on the packaging are decisive.

O&M Original Mineral